|Permissible axle load||1.800 kg|
|Inner Roller edges||900 mm|
|Outer Roller edges||2.100 mm|
|Typical axle distance||min. 1.200 mm
max. 3.200 mm
|Roller diameter||240 mm|
|Max. speed||100 km/h|
|Motor power||4x 15 kW|
|Acceleration||max. 5 m/s²|
|Deceleration||max. 5 m/s²|
|Height of modules||325 mm|
|Total weight||3.000 kg|
|Control||fibre optic cable (GOF type)|
|Temperature range||-10 °C...+40 °C|
|Working range||0 °C...+35 °C|
|Drive unit||shielded and radio interference suppressed; 20dB under CISPR 22 Class B|
|Current consumption||2x 63 A|
The Dynamometer RPS40-100-5-F is designed to be used in an anechoic chamber for EMI & EMC measurements. The free-standing design allows an quick setup and storage on top of a Turntable. Two active axles are used for cars with front / rear wheel dirve as well as 4WD. Each car wheel is driven by a separate Motor/Generator.
All electronic components are located inside the modules in a shielded and radio interference suppressed cabinet. The typical Emission level is below the CISPR 22 class B regulation. The immunity against field strength up to 200V/m is guaranteed.
An Noise-free (Zero emission) execution is optionally available.